4-Channel Smart Home Automation PCB | ESP32 Based | Fully Assembled – Model TMT4N25
16 in stock
- Model: TMT4N25
- Microcontroller: ESP32 (Wi-Fi + Bluetooth)
- Channels: 4 AC Load Outputs
- Control: Internet + Manual Switch
- Safety: Onboard Fuse (Overload & Short Circuit)
- Connectors: Heavy-Duty Terminals + JST for Switches
- Programming: USB (No External Programmer Needed)
- Build: Through-Hole Components
- Dimensions: 87 mm × 82.8 mm
₹1,799.00 ₹1,999.00
16 in stock
CompareDeploy Home Automation in Minutes – Fully Assembled 4-Channel ESP32-Based PCB
Model No.: TMT4N25
Deploy smart home automation quickly and affordably with our fully assembled and tested 4-Channel Home Automation PCB – Model TMT4N25. It integrates everything you need—controller, safety circuitry, and reliable connectors—into one compact, user-friendly design. Just flash your firmware, connect your appliances, and link it to your preferred cloud platform.
Key Features:
- ESP32 Microcontroller: Powerful dual-core MCU with Wi-Fi and Bluetooth capabilities.
- Four Independent AC Channels: Control lights, fans, sockets, and other appliances.
- Cloud-Compatible: Ready for popular IoT platforms including Blynk, ESP-RainMaker, KME Smart, Arduino IoT Cloud, and more.
- Safety Circuitry: Built-in fuse provides protection against overload and short circuits.
- Heavy-Duty Terminal Connectors: Ensures secure, heat-resistant load connections.
- JST Connectors: Easy plug-in connections for manual switches.
- Through-Hole Components: Easy to repair, ideal for DIY enthusiasts.
Technical Specifications:
| Parameter | Value |
|---|---|
| Microcontroller | ESP32 |
| Control Channels | 4 Independent Channels |
| Control Methods | Internet and Manual Switch |
| Protection | Onboard Fuse (overload & short circuit) |
| Connectors | Heavy-Duty Terminal & JST Connectors |
| Components | Through-Hole |
| Programming Interface | USB Interface (No External Programmer Required) |
| Dimensions | 87.00 mm x 82.80 mm |
Applications:
- Smart Home Automation
- IoT-enabled Home Appliances
- Remote Appliance Control
- DIY Smart Home Projects
- Industrial and Domestic Automation
What’s Included:
- 1 x Fully Assembled ESP32-based Home Automation PCB (tested and ready to use)
Effortlessly transform your home into a smart home!
Designed & Proudly Made by Technolab Electronics.
- Model: TMT4N25
- Microcontroller: ESP32 (Wi-Fi + Bluetooth)
- Channels: 4 AC Load Outputs
- Control: Internet + Manual Switch
- Safety: Onboard Fuse (Overload & Short Circuit)
- Connectors: Heavy-Duty Terminals + JST for Switches
- Programming: USB (No External Programmer Needed)
- Build: Through-Hole Components
- Dimensions: 87 mm × 82.8 mm
Based on 1 review
Add a review
Related products
-
Automation PCBs
8-Channel Home-Automation PCB, Model-SMT8N25 (fully assembled)
- Model SMT8N25 – ESP32-based 8-channel relay board for smart-home projects
- Controls up to 8 AC appliances; heavy-duty screw terminals resist arcing
- Built-in ESP32-WROOM with Wi-Fi + BLE; ready for Blynk, ESP-RainMaker, KME Smart, CADIO, Arduino IoT Cloud
- USB-C programming port (CP2102N auto-reset) — no external programmer needed
- On-board safety features: fast-blow fuse + optocoupler isolation between mains and logic
- Plug-and-play JST headers for wall switches, DHT sensor, IR receiver, and buzzer
- Exposed UART, 3.3 V, 5 V, GND pins for easy expansion
- Slim 142 × 70 mm PCB fits behind standard 6-/8-gang switch plates
SKU: SMT8N25-0037 -
Automation PCBs
8-Channel Smart Home Automation PCB | ESP32 Based | Fully Assembled – Model TMT8N26
-12%
Automation PCBs8-Channel Smart Home Automation PCB | ESP32 Based | Fully Assembled – Model TMT8N26
- Model: TMT4N25
- Microcontroller: ESP32 (Wi-Fi + Bluetooth)
- Channels: 4 AC Load Outputs
- Control: Internet + Manual Switch
- Safety: Onboard Fuse (Overload & Short Circuit)
- Connectors: Heavy-Duty Terminals + JST for Switches
- Programming: USB (No External Programmer Needed)
- Build: Through-Hole Components
- Dimensions: 137 mm × 77 mm
SKU: n/a -
-
Custom PCBs & Breakout Boards
ESP Programmer Module V1 based on CP2102N
Chipset: CP2102N USB to UART bridge controller
Connector Type: USB Type-C
Dimensions: 20mm x 35mm
Operating Voltage: 3.3V
Data Transfer Rate: Up to 3 Mbps
Compatibility: Supports Windows, MacOS, and Linux
Operating Temperature Range: -40°C to +85°C
Weight: 5 gramsSKU: 0018
Chinnappan Innasu –
Received the Board in Good condition,I progammed ESP Home automation,plz increase the board size help to install in a case,as well as the mounting holes.Mr/Chinnappan Palakkad
Chinnappan Innasu –
technolab_october –
Thank you for your feedback! 😊 We’re glad the board worked well for your project. We appreciate your suggestion about increasing the board size and adding mounting holes, and we’ll consider it in future revisions. Happy building!
technolab_october –